PIX6
Open-source Flight Controllers for All Models
Reshaping New Productive Forces
Compatible with the
Open-source Ecosystem
Vibration Damping by
Software and Mechanical
16 Channels Output
Dual-Gyro Built-in
HD Digital and Analog Video Transmission Supported
OSD Module Integrated
Cost-effective Solution
Two-way DShot Supported
ESC Information Telemetry Supported
Comprehensive Interfaces
Compatible with the ArduPilot Open-source Ecosystem
Multiple Mission Planner Supported
Firmware can be updated in Radiolink, ArduPilot, and QGC Mission Planner.
And, supports all Mission Planners in setting parameters.
Compatible with the firmware of ArduPilot.
The source code of RadioLink PIX6 can be downloaded by clicking the link below:
https://github.com/ArduPilot/ardupilot/tree/master/libraries/AP_HAL_ChibiOS/hwdef/RadiolinkPIX6
Vibration Damping by Software and Mechanical
Achieve Higher Positioning Accurate At High-Speed
Based on the unique software vibration damping algorithm of Radiolink’s PIXHAWK and Mini Pix, mechanical vibration damping technology is added to effectively filter out high-frequency vibrations, always guarantee the accuracy of sensor data, and ensure that PIX6 achieves more accurate positioning even in high-speed mode. The helicopter can accurately lock the tail and fly stably even without installing the vibration reduction bracket.。
Dual-gyro Built-in
Built-in BMI088 and ICM42688-P dual gyroscopes.
When the main gyroscope is abnormal, it will switch automatically to the secondary gyroscope,
providing stronger safety protection for UAVs.
16 Channels Output
Adaptable to the dual-copter, tri-copter, quadcopter, hexacopter, octocopter, Y6 copter, X8 copter, helicopters, airplanes, VTOL fixed-wing, cars, boats, submarines, radar trackers, mowers, agricultural vehicles, etc.
Flight Formation Delivery Drones Flying Cars Agricultural Drone
Submarines Agricultural Vehicles VTOL Fixed-wing
Autonomous Underwater Vehicle (AUV)
OSD Module Integrated
Real-time Gesture Visualization Display
PIX6 can graphically display OSD information such as the flight direction and position of the aircraft in real-time without the need for an external OSD module. The pilot can intuitively grasp the status and coordinates* of the aircraft at any time during the first-view (FPV) flight of aircraft such as racing drones and long-distance fixed-wing aircraft. Achieve a more comfortable flying experience.
*Real-time display of flight information such as flight mode, distance, GPS stars, longitude and latitude, vertical speed, magnetic deviation, current time, battery voltage, current, wind speed, return route, exact route, vibration status, direction, etc.
Rich parameters display and thoughtful setup make the safer flight.
Secondary Development Support
Functions can be customized according to project requirements.
*The source code of RadioLink PIX6 can be downloaded by clicking the link below:
https://github.com/ArduPilot/ardupilot/tree/master/libraries/AP_HAL_ChibiOS/hwdef/RadiolinkPIX6
Unique Automation
Software Testing System
Cost-effective Solution
Comprehensive
Technical Support
Unique Automation Software Testing System
Quality Assurance
The same Automation Software Testing System as PIXHAWK and Mini Pix helps realize test automation from the sensor to connection ports and interface. The test efficiency and quality assurance are far superior to traditional manual tests, ensuring the quality of every function of every PIX6.
Cost-effective Solution
Unlimited Application Potential
PIX6 works with Radiolink's latest multi-star multi-frequency centimeter-level accuracy RTK positioning system (including RTK GPS, base station, air system ground system, etc.), and is equipped with Radiolink's automatic driving control system that can realize the automatic driving of agricultural plant protection vehicles with four wheels turning 90 degrees on the spot and moving sideways, execute missions programmed automatically, designed for the agricultural vehicles has achieved the ideal operation effect and solve the industry problem of agricultural vehicles will pressing seedlings when changing lines. Help build a new form of smart agriculture.
Use as a Rover
Use as the Base Station
Dual GPS Support
PIX6 supports an external dual GPS connection, ensuring stronger anti-interference capabilities, higher accuracy, and greater security.
Auto Flight by Following the Waypoints
216MHz basic frequency memory, 2MB flash memory, 512K RAM, and 32KB FRAM.
Dataflash Log can be checked makes all operations can be traced.
718 waypoints can be stored up if used for the multi-copters, and 724 waypoints can be stored up if used for airplanes, cars,
and boats which means it can be used in multiple industries such as aerial land surveying, hydrographic surveying,
autonomous search, rescue, material delivery, agricultural vehicle, and in unmanned aerial vehicle navigation.
Basic Frequency Memory
Flash Memory
RAM
FRAM
The tutorial manual about how to set the flight waypoints:
Automatic Return, GeoFence
Worry-free from Long-range Voyage
Support automatic return by switching, automatic return when the signal is lost or voltage is lower than settings.
Geofence settings according to the drone management regulations promulgated by the country.
It can fly within the prescribed flight airspace and fly law-abidingly.
HD Digital and Analog Video Transmission Support
It supports analog image transmission plug-and-play.
the high-definition digital image transmission DJI DIGITAL FPV SYSTEM, DJI O3 Air Unit,
or Caddx Walksnail Avatar HD System can be connected through the adapter board DiViT
to easily obtain 720p/120fps high-definition and smooth video experience.
Power Module* with Wide Voltage Input
The power module that comes with the flight controller with a wide voltage input range of 2-12S (7.4-50.4V), a maximum detection current of 90A (single ESC maximum detection current is 22.5A), a BEC output voltage of 5.3±0.2V, and a BEC output current of 2A.
When installing the helicopters, fixed-wingers, mowers, bait boats, etc., please select the power module shown in the figure above.
When installing the flying cars, multi-copters, VTOL Fixed-Wing, etc., please select the power module shown in the figure above.
*Note: The default factory packing only includes one piece of power module (choose one from the two power modules above). When purchasing, please choose the correct power module package version according to the installation requirements.
Use Guarantee
Installation and Parameter Setting are not Difficult
With the accumulation of research and development in the past ten years, we have reanalyzed and retested all the functions of all the models including airplanes, multi-copters, helicopters, cars, and boats. All the usage guidance needed for all functions from basic use, PID parameter adjustment, log viewing, etc. of each model we can offer.
FAQ on the official website, Facebook, YouTube, Instagram, and the professional section of the forum, Radiolink is eager to help users use Radiolink products on multiple platforms.
Receiver
Digital Transmission
Mission Planner
Remote Control
SDK
Intelligent ESC
RTK F9P
Flight Controller
Spektrum DSM Receiver
CAN(controller area network) Bus 1
CAN(controller area network) Bus 2
Analog to Digital Converter 6.6V
GPS Module
Safety Switch
I2C Splitter or
Compass Module
Power Module2:
SMBUS/I2C Power Module Inputs
Receiver Connection Port (SBUS Signal Input)
SBUS Signal Output
Main Output
(connected to motors)
Auxiliary Outputs
(reserved and advanced settings, external tripod steering gear, lighting, and other equipment)
LED Indicator
Telemetry2(for data telemetry module etc.)
Telemetry1(for data telemetry module etc.)
OSD Connect Port
Analog to Digital Converter 3.3V
Buzzer
USB
SPI (Serial Peripheral Interface)
GPS Module
Power Module1:
Voltage and Current Monitor Inputs(Analog)
信号
正极
LED指示灯
Type-C:
Parameter adjustment/
Firmware Upgrade
开发者调试口
输入/输出
重置按钮
95.5mm
51.5mm
15mm
SD卡
飞行管理重置按钮
VCC(+3.3V ), GND, Signal(+3.3V)r
VCC(+5V), CAN_H(+12V), CAN_L(+12V), GND
VCC(+5V), CAN_H(+12V), CAN_L(+12V), GND
VCC (+5V), ADC IN(up to 6.6V), GND
VCC(+5V), TX(OUT +3.3V ), RX(IN +3.3V ), SCL(+3.3V), SDA(+3.3V), GND
VCC(+3.3V), !IO_LED_SAFETY(GND), SAFETY(GND)
VCC(+5V), SCL(+3.3V pullups), SDA(+3.3V pullups), GND
LED Indicator
VCC(+5V), TX(OUT +3.3V), RX(IN +3.3V), CTS(+3.3V), RTS(+3.3V), GND
VCC(+5V), TX(OUT +3.3V), RX(IN +3.3V), CTS(+3.3V), RTS(+3.3V), GND
GND, VOUT(+3.3V ), VCC(+5V), GND, VCC(+5V), VIN(+3.3V)
VCC(+5V ), ADC IN1(up to +3.3V), GND, ADC IN2(up to +3.3V), GND
VCC(+5V), BUZZER-(+5V)
USB VDD (+5V), DM(+3.3V), DP(+3.3V), GND
VCC(+5V), SPI_SCK(+3.3V), SPI_MISO(+3.3V), SPI_MOSI(+3.3V), !SPI_NSS1(+3.3V), !SPI_NSS2(+3.3V), DRDY(+3.3V), GND
GPS Module
GPS Module
Auxiliary Outputs
(reserved and advanced settings, external tripod steering gear, lighting, and other equipment)
Main Output
(connected to motors)
SBUS Signal Output
Receiver Connection Port (SBUS Signal Input)
VCC(+5V), VCC(+5V), SCL(+3.3V), SDA(+3.3V), GND, GND
PIX6包装清单
PIX6(Flight Control)*1
Power Module(2-12S)*1
Buzzer * 1
Safety Switch * 1
4G TF (MicroSD) Card* 1
Double-sided Adhesive Tape*2
CAN1/2 Port Connect Cable*2
DSM RC Port Connect Cable*1
TELEM1/2 Port Connect Cable*2
ADC 6V6 Port Connect Cable*1
ADC 3V3 Port Connect Cable*1
OSD Port Connect Cable*1
GPS1/2 Port Connect Cable*2
SWITCH Port Connect Cable*1
I2C Port Connect Cable*1
SPI Port Connect Cable*1
POWER1 Port Connect Cable*1
POWER2 Port Connect Cable*1
Debug Port Connect Cable*1
Receiver Connect Cable*1
USB Port Connect Cable*1
Type-C Cable(Upgrade&Parameter set)*1
User Manual * 1
Packaging Color Box*1